استعادة كلمة المرور تنشيط العضوية طلب رقم التفعيل التسجيل البحث مشاركات اليوم اجعل كافة الأقسام مقروءة


 

العودة   منتديات تكنو فور كوم || TECHNO4COM FORUMS > :: الاقســــام التقنيـــــة :: > روائــع البرامــج الكاملـــة
هل نسيت كلمة المرور؟
الملاحظات
روائــع البرامــج الكاملـــة لكل برنامج سيريال او كراك ليصبح كامل .. هنا نختصر المسافات بوضع البرنامج مع تفعيله


WireShark 2.2.0.RC1 (x86x64) + Portable

روائــع البرامــج الكاملـــة


إضافة رد
 
أدوات الموضوع انواع عرض الموضوع
قديم 09-02-2016, 01:12 AM   رقم المشاركة : [1]
mitsumi
:: تكنو ماسي ::
 




 

مركز رفع الصور والملفات

افتراضي WireShark 2.2.0.RC1 (x86x64) + Portable


WireShark 2.2.0.RC1 (x86x64) Portable

WireShark 2.2.0 RC1 (x86/x64) + Portable | 133.0 Mb
If your computer is always connected to the Internet or local network, it's vulnerable to hacker attacks and malware infections. In addition to using a powerful and updated antivirus solution (obligatory for any responsible PC user), you can also use a network analysis tool to identify the malicious packets and block them. Such an application is WireShark and it's free to use.

Customizable setup pack
When deploying WireShark on your computer, you can choose the plugins and extensions you want to install, such as the Dissector plugin, Tree Statistics, SNMP MIBs, or the **** Analysis and Tracing Engine.
Since these utilities are meant to provide a wider range of information about your network traffic and they can be easily disabled, it is advisable to install them alongside Wireshark. The same advice applies to the extra tools bundled with the setup and to the recommended file associations for trace files found on the PC.
The final step before finalizing the initial configuration is for the setup to check whether you have WinPcap installed on your computer, and to install it if missing.
Set filters to capture network traffic
If you are using several network cards, WireShark lets you choose the one for capturing the network traffic. Once the capture has begun, you can monitor all the connections and their corresponding details - you also get the chance to create filters to keep an eye on just certain types of connections.
Color-coded packet types to spot them easier
Another way to make sure you correctly monitor the type of packets you want is to apply color schemes for each type of connection, so that the most important ones are the most visible. If you are not satisfied with the color templates provided by Wireshark, you can create a custom one by specifying the shade and string to be monitored.
Wireshark also comes with a Statistics function that can be used to generate reports to be analyzed at a later time. Depending on your necessities, you can choose to view the details of the protocol hierarchy, endpoint, packet lengths, or the IO graph.
Overall, an advanced and dependable protocol analyzer
With all things considered, WireShark can come in handy to all those who want to be in control of their network connections and limit them whenever needed. However, it does take an expert to use the app to its full potential.
New in version 2.2.0 RC 1 (August 23, 2016)
NEW:
Invalid coloring rules are now disabled instead of discarded. This will provide backward compatibility with a coloring rule change in WireShark 2.2.
BUG FIXES:
Upgrading to latest version uninstalls Microsoft Visual C++ redistributable. ([1]Bug 12712)
NEW UPDATES AND FEATURES:
Added -d option for Decode As support in WireShark (mimics TShark functionality)
The Qt UI, GTK+ UI, and TShark can now export packets as JSON.
TShark can additionally export packets as Elasticsearch-compatible JSON.
The Qt UI now supports the -j, -J, and -l flags. The -m flag is now deprecated.
The Conversations and Endpoints dialogs are more responsive when viewing large numbers of items.
The RTP player now allows up to 30 minutes of silence frames.
Packet bytes can now be displayed as EBCDIC.
The Qt UI loads captures faster on Windows.
proto_tree_add_checksum was added as an API. This attempts to standardize how checksums are reported and filtered for within Shark. There are no more individual "WireShark 2.2.0.RC1 (x86x64) Portable" and "bad" filter fields, protocols now have a "checksum.status" field that records "Good", "Bad" and "Unverified" (neither WireShark 2.2.0.RC1 (x86x64) Portable or bad). Color filters provided with WireShark have been adjusted to the new display filter names, but custom ones may need to be updated.
The intelligent scroll bar now sits to the left of a normal scroll bar and provides a clickable map of nearby packets.
You can now switch between between Capture and File Format dissection of the current capture file via the View menu in the Qt GUI.
You can now show selected packet bytes as ASCII, HTML, Image, ISO 8859-1, Raw, UTF-8, a C array, or YAML.
You can now use regular expressions in Find Packet and in the advanced preferences.
Name resolution for packet capture now supports asynchronous DNS lookups only. Therefore the "concurrent DNS resolution" preference has been deprecated and is a no-op. To enable DNS name resolution some build dependencies must be present (currently c-ares). If that is not the case DNS name resolution will be disabled (but other name resolution mechanisms, such as host files, are still available).
The byte under the mouse in the Packet Bytes pane is now highlighted.
TShark supports exporting PDUs via the -U flag.
The Windows and OS X installers now come with the "sshdump" and "ciscodump" extcap interfaces.
Most dialogs in the Qt UI now save their size and positions.
The Follow Stream dialog now supports UTF-16.
The Firewall ACL Rules dialog has returned.
The Flow (Sequence) Analysis dialog has been improved.
We no longer provide packages for 32-bit versions of OS X.
The Bluetooth Device details dialog has been added.
New File Format Decoding Support:
Wireshark is able to display the format of some types of files (rather than displaying the contents of those files). This is useful when you're curious about, or debugging, a file and its format. To open a capture file (such as PCAP) in this mode specify "MIME Files Format" as the file's format in the Open File dialog.
New Protocol Support:
Apache Cassandra - CQL version 3.0, Bachmann bluecom Protocol, Bluetooth Pseudoheader for BR/EDR, CISCO ERSPAN3 Marker, Edge Control Protocol (ECP), Encrypted UDP based FTP with multicast, Ericsson IPOS Kernel Packet Header Dissector Added (IPOS), Extensible Control & Management Protocol (eCMP), FLEXRAY Protocol dissector added (automotive bus), IEEE 802.1BR E-Tag, ISO 8583-1, ISO14443, ITU-T
G.7041/Y.1303 Generic Framing Procedure (GFP), LAT protocol (DECNET), ****mako trailers, Network-Based IP Flow Mobility (NBIFOM), Nokia Intelligent Service Interface (ISI), Open Mobile Alliance Lightweight Machine to Machine TLV payload Added (LwM2M TLV), Real Time ******** System (RTLS), RTI TCP Transport Layer (RTITCP), STANAG 5602 SIMPLE, USB3 Vision Protocol (USB machine vision cameras), USBIP Protocol, UserLog Protocol, and Zigbee Protocol Clusters Dissectors Added (Closures Lighting General Measurement & Sensing HVAC Security & Safety)
Updated Protocol Support:
Bluetooth OBEX dissector (btobex) was renamed to Obex Dissector (obex), allow to DecodeAs it over USB, TCP and UDP.
A preference was added to TCP dissector for handling IPFIX process information. It has been disabled by default.
New and Updated Capture File Support:
Micropross mplog
New and Updated Capture Interfaces support:
Non-empty section placeholder.
Major API CHANGES:
The libwireshark API has undergone some major changes:
The address macros (e.g., SET_ADDRESS) have been removed. Use the (lower case) functions of the same names instead.
"old style" dissector functions (that don't return number of bytes used) have been replaced in name with the "new style" dissector functions.
tvb_get_string and tvb_get_stringz have been replaced with tvb_get_string_enc and tvb_get_stringz_enc respectively.

OS: Windows Vista / 7 / 8 / 2008 / 10 (32/64-bit) and 2003 / 2008 R2 / Server 2012

Download link:
Links are Interchangeable - No Password - Single Extraction



WireShark 2>2>0>RC1 (x86x64) + Portable








من مواضيع mitsumi
mitsumi غير متواجد حالياً   رد مع اقتباس
قديم 09-02-2016, 10:43 AM   رقم المشاركة : [2]
CLassiC
:: شخصيـﮧ هامـﮧ ::

 الصورة الرمزية CLassiC
 




 

مركز رفع الصور والملفات

افتراضي

ياعيني عليك ... تستاهل من يرد عليك :)

يعطيك العافية حبيبي
من مواضيع CLassiC
توقيع CLassiC
 
أحد يقدر يجي جنبي


CLassiC غير متواجد حالياً   رد مع اقتباس
إضافة رد

مواقع النشر (المفضلة)

أدوات الموضوع
انواع عرض الموضوع

تعليمات المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

BB code is متاحة
كود [IMG] متاحة
كود HTML معطلة

الانتقال السريع


الإعلانات النصية

مركز تحميل الصور:




الساعة الآن 02:42 PM الساعة معتمدة بتوقيت جرينتش +3


Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd. Upgrade & Development By TECHNO4COM

الموقع غير مسؤول عن أي اتفاق تجاري أو تعاوني
فعلى كل شخص تحمل مسئولية نفسه إتجاه مايقوم به من اتفاق تجاري
التعليقات المنشورة لا تعبر عن رأي إدارة ومُلاك شبكة تكنو فور كوم ولا نتحمل أي مسؤولية قانونية حيال ذلك (ويتحمل كاتبها مسؤولية النشر)


Protected by CBACK.de CrackerTracker

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Add to Windows Live Rojo RSS reader iPing-it Add to Feedage RSS Alerts Add To Fwicki Add to RSS Web Reader Add to Feedage.com Groups Add to NewsBurst Subscribe in NewsGator Online Add to Netvibes

Preview on Feedage: -%D9%85%D9%86%D8%AA%D8%AF%D9%8A%D8%A7%D8%AA-%D8%AA%D9%83%D9%86%D9%88-%D9%81%D9%88%D8%B1-%D9%83%D9%88%D9%85-Add to My Yahoo! Add to Google! Subscribe in Bloglines Add to Alesti RSS Reader Add to MSN Add to AOL! Add to meta RSS Add to Windows Live